An on-the-spot Work Experience item in which a child shapes a product from thin sheet metal.
Sheet metal work cuts, bends and joins thin metal into boxes, funnels, trays and holders using snips, hammers and simple joints.
In the Kerala School Sasthrolsavam Work Experience Fair (Pravrutthiparichayamela) it is an on-the-spot item for individual entrants, open to girls and boys at Lower Primary (classes 1-4), Upper Primary (classes 5-7), High School (classes 8-10) and Higher Secondary/VHSE (classes 11-12). Each child works alone for a fixed period at the venue, with the product then displayed for viewing at the district and state stages. Children at every level enter, with the same four-line score sheet applied throughout; judges simply expect more finish, accuracy and technical understanding from older entrants.
The child marks, cuts, bends and joins the metal and smooths edges. Judges look at accurate cuts, clean joints and safe edges.
Every Work Experience item uses the fair’s single shared score sheet: the workload and the child’s own contribution carry 40 marks, skill and completeness 25, knowledge of raw materials and tools 20, and social utility, speciality and marketability 15. For sheet metal work, that means making it yourself earns the workload marks, accurate cuts and square bends show skill, knowing metals and tools shows knowledge, and a useful article earns the utility marks.
Where Sheet Metal Work is run
This item is part of the official Kerala School Sasthrolsavam Work Experience Fair (Pravrutthiparichayamela), one of the five fairs of the Kerala state school Sasthrolsavam, and is installed on eTalenter through the Work Experience Fair template built from the official item list and evaluation indicators. It runs at LP/UP/HS/HSS/VHSE level and moves from school and sub-district upward by grade. This page describes the Kerala format only.
- Kerala, India
Key facts
- Individual on-the-spot item, girls and boys.
- Offered at LP/UP/HS/HSS/VHSE.
- Workload and own contribution 40, skill and completeness 25, knowledge of materials and tools 20, social utility and marketability 15.
- Product: an article from thin sheet metal.
- Edge safety and accuracy are observed.
- The finished product is displayed for public viewing at later stages.
On eTalenter, Sheet Metal Work is filed under Off Stage and typically scored with Marks. It appears in 1 ready-made event templates — each one can adjust its time limit, age-group assignment and scoring setup independently.
Across the templates that use it, Sheet Metal Work is most often entered as an Individual competition, typically scored out of 100.
What judges look at in Sheet Metal Work
What a Sheet Metal Work panel is actually weighing up, and where the marks are usually won or lost:
- Workload and the child’s own contribution (40): marking, cutting and bending done by the child.
- Skill and completeness (25): accurate cuts and clean, safe edges.
- Knowledge of raw materials and tools (20): knows the sheet, snips and joints.
- Social utility, speciality and marketability (15): a tray, funnel or holder that sells.
Treat these as the judging focus, not a fixed rubric: publish your own weighted criteria for Sheet Metal Work under Scoring Setup, or start from the judging and scoring software guide.
How to prepare for Sheet Metal Work
How entrants and their teachers usually get Sheet Metal Work right on the day:
- Draw a net first.
- Wear gloves for cutting.
- File all edges smooth.
- Bend along a straight edge.
- Join firmly.
- Choose a simple product.
- Idea to try: a small tray
- Idea to try: a funnel
- Idea to try: a pen holder
Ready-made event templates that include Sheet Metal Work
Open any template to preview it in eTalenter and install it as a live, editable event.
| Template | Category | Score label | Competitions |
|---|---|---|---|
| Kerala School Sasthrolsavam – Work Experience Fair | Off Stage | Marks | 4 |
Frequently asked questions
Is Sheet Metal Work judged individually or as a team?
Across eTalenter’s templates it’s most often run as an Individual entry, though an organiser can set either participation type when assigning the item to an age group.
Is it dangerous?
Edges are sharp; safety is part of the score.
Which metal?
Thin sheet as supplied.
Is Sheet Metal Work a team or individual item?
Individual. Each child makes their own product, and the fair’s rule is one item per participant.
How is Sheet Metal Work scored?
On the fair’s shared four-line sheet: workload and own contribution 40, skill and completeness 25, knowledge of materials and tools 20, social utility and marketability 15.
Want the full judging picture? Read the judging and scoring software guide, or browse every off stage competition item.
Try Sheet Metal Work in eTalenter
See every ready-made template that runs Sheet Metal Work, and install one as a live event — age groups, rules and scoring included.
Leave a Reply
You must be logged in to post a comment.