A Grade 9-12 individual contest in which each learner produces a computer-aided drawing set for a house, a floor plan, elevations and a perspective, marked out of 100.
Technical Drafting is a design-and-drawing contest for senior learners. Using computer-aided design software, each entrant produces the drawings that describe a small house: a floor plan, the elevations (the views of each face of the building) and a perspective view that shows how the house would look to a visitor. Judges mark the accuracy of each drawing, the quality of the design and the way the learner explains the process.
In the template it is an individual item for Grades 9 to 12, open to boys and girls, with no language restriction. It sits in the Special category and is marked out of 100 on ten printed criteria: accuracy of the floor plan 15, accuracy of the elevations 15, accuracy of the perspective 10, architectural design 15, aesthetic design 5, structural design 10, originality 5, details 5, ability to present the process 10 and speed 10.
The criteria show how a round runs. The learner works at a computer station from a design brief, builds the plan first, derives the elevations and perspective from it, and then walks the judges through the work. Because the three views must agree with each other, a learner who sets out the plan carefully gains marks in every later drawing, while a mistake in the plan carries through to the elevations and the perspective.
Organisers run it because it joins drawing skill, spatial thinking and software fluency in one task, and it is a natural link to architecture and engineering courses. The template prints no time limit, warning bell, software name, design brief or equipment rule for this item, so the organiser must announce the brief, the software provided and the length of the round.
Where Technical Drafting (Computer-Aided Design of a House) is run
In the data this item belongs to one template, a Philippine government-run learner festival held at division, regional and national levels, where it is one of the technology and livelihood contests for the senior high grades. Computer-aided drafting is taught in technical and vocational streams in many countries, so teachers elsewhere will recognise the format.
- Philippines
Key facts
- Individual entry, open to boys and girls.
- Grades 9-12 only; entry is by grade level.
- No language restriction.
- Marked out of 100 on ten criteria; the three accuracy criteria together are worth 40 and the four design criteria 35.
- The template prints no time limit, warning bell, software or design brief; confirm these in the organiser brief.
- Ideas (not rules) for practice briefs: a two-bedroom bungalow on a narrow plot, a raised house for a flood-prone area, or a small house with a covered veranda.
On eTalenter, Technical Drafting (Computer-Aided Design of a House) is filed under Special and typically scored with Marks. It appears in 1 ready-made event templates — each one can adjust its time limit, age-group assignment and scoring setup independently.
Across the templates that use it, Technical Drafting (Computer-Aided Design of a House) is most often entered as an Individual competition, typically scored out of 100.
The scoring method the templates attach to this item, and what that scale means. The category this competition is filed under when a template is installed. Others in this category: Fancy Dress, Talents Show, Special Performances, Exhibition, Cultural Programs, Theme Events eTalenter matches an item to its criteria on the words in its name, and creates exactly these when the template is installed. Each organiser scores this competition on its own criteria. These are the ones the ready-made templates carry.How it is scored
Where it sits
Judging criteria installed for it
How organisers judge it
DepEd Festival of Talents (Division, Regional and National)
What judges look at in Technical Drafting (Computer-Aided Design of a House)
What a Technical Drafting (Computer-Aided Design of a House) panel is actually weighing up, and where the marks are usually won or lost:
- Accuracy of the floor plan (15), elevations (15) and perspective (10): correct dimensions, wall thicknesses, door and window positions, and views that match the plan. Elevations that contradict the plan lose marks in more than one place.
- Architectural design (15): rooms that are sensibly sized and connected, with a clear entrance, circulation and natural light.
- Structural design (10): walls, openings and roof that could actually be built and hold up.
- Aesthetic design (5), originality (5) and details (5): a pleasing look, a personal idea, and finishing touches such as dimensions, labels, doors, windows and stairs.
- Ability to present the process (10): explaining how the plan led to the elevations and perspective and why design choices were made.
- Speed (10): a larger share than in most contests, so a learner who cannot finish all three views loses marks twice, once for the missing drawing and again for speed.
Treat these as the judging focus, not a fixed rubric: publish your own weighted criteria for Technical Drafting (Computer-Aided Design of a House) under Scoring Setup, or start from the judge scoring and tabulation software guide.
How to prepare for Technical Drafting (Computer-Aided Design of a House)
How entrants and their teachers usually get Technical Drafting (Computer-Aided Design of a House) right on the day:
- Practise the order of work: set up units and layers, draw the floor plan, project the elevations from it, then build the perspective.
- Time yourself on a full set of three drawings with a practice brief, and note which view takes longest.
- Learn the software shortcuts you will use most, for walls, openings, dimensions and layers, until they are automatic.
- Check each drawing against the others before finishing: the doors and windows on the plan must appear in the elevations.
- Add labels, dimensions and room names; the details criterion rewards a drawing that someone else could read.
- Rehearse a one-minute explanation of the design in your own words, covering the layout, the structure and what you would change with more time.
- Confirm with the organiser which software, files and equipment are provided and whether personal templates or libraries are allowed.
- After a lost round, ask which drawing lost the most marks and practise that view next.
Events that run this (1)
Ready-made templates that already include this competition. Installing one sets it up for you.
Frequently asked questions
Is Technical Drafting (Computer-Aided Design of a House) judged individually or as a team?
Across eTalenter’s templates it’s most often run as an Individual entry, though an organiser can set either participation type when assigning the item to an age group.
What is Technical Drafting in this festival?
It is a Grade 9-12 individual contest in this festival template. The learner uses computer-aided design software to draw a house as a floor plan, elevations and a perspective view, and is marked out of 100.
What earns the most marks?
Accuracy is worth 40 marks across the floor plan (15), elevations (15) and perspective (10). Architectural design is 15, structural design and speed are 10 each, and presenting the process is 10.
Is speed important?
Yes, speed carries 10 marks, more than in many contests, and an unfinished view also loses accuracy marks.
Which software must be used?
The template does not name any software. Organisers normally announce the program provided; confirm it in the brief.
Is it judged individually or as a team?
Individually. Each learner produces one drawing set and receives one mark out of 100.
Similar competitions
Items whose names share a word with this one — usually the same discipline in another form.
Want the full judging picture? Read the judge scoring and tabulation software guide, or browse every special competition item.
Try Technical Drafting (Computer-Aided Design of a House) in eTalenter
See every ready-made template that runs Technical Drafting (Computer-Aided Design of a House), and install one as a live event — age groups, rules and scoring included.
See where Technical Drafting (Computer-Aided Design of a House) is used
