A Grade 9-12 individual contest in which each learner reads a schematic diagram and installs a working electrical circuit, marked out of 100.
Electrical Installation and Maintenance, usually shortened to EIM, is a hands-on skills contest for senior learners in technical and vocational streams. The learner is given a schematic diagram and must turn it into a real installation: reading the symbols, laying out the components, wiring them correctly and leaving a circuit that works safely. Judges mark the finished installation and also watch how the learner works.
In the template it is an individual item for Grades 9 to 12, open to boys and girls, with no language restriction. It sits in the Special category and is marked out of 100 on six printed criteria: accuracy of interpretation of the schematic diagram 25, accuracy of installation 30, use of tools 15, safety 15, speed 10 and ability to explain the process 5.
The weights show how a round runs. More than half of the marks (55) depend on reading the diagram and building exactly what it shows, so a learner who misreads one connection loses marks twice, once for interpretation and again for installation. Tool handling and safe working habits are marked while the learner is working, not only on the finished board, which is why judges stand and watch rather than simply inspecting the result.
Organisers run it because it tests a practical trade skill that written exams cannot, and because it links school learning to real work in building maintenance. The template prints no time limit, warning bell, circuit design, tool list or board specification for this item, so the organiser must announce the schematic, the materials supplied and the length of the round.
Where Electrical Installation and Maintenance (EIM) is run
In the data this item belongs to one template, a Philippine government-run learner festival held at division, regional and national levels, where it is one of the technology and livelihood contests for the senior high grades. Electrical installation is taught in technical and vocational courses in many countries, so teachers elsewhere will recognise the format of reading a diagram and wiring to it.
- Philippines
Key facts
- Individual entry, open to boys and girls.
- Grades 9-12 only; entry is by grade level.
- No language restriction.
- Marked out of 100 on six criteria; reading the diagram (25) and installing accurately (30) together carry 55 marks.
- The template prints no time limit, warning bell, circuit or tool list; confirm these in the organiser brief.
- Ideas (not rules) for practice circuits: a one-lamp circuit with a single switch, a two-way switch staircase circuit, or a socket outlet with a protected lamp circuit.
On eTalenter, Electrical Installation and Maintenance (EIM) is filed under Special and typically scored with Marks. It appears in 1 ready-made event templates — each one can adjust its time limit, age-group assignment and scoring setup independently.
Across the templates that use it, Electrical Installation and Maintenance (EIM) is most often entered as an Individual competition, typically scored out of 100.
The scoring method the templates attach to this item, and what that scale means. The category this competition is filed under when a template is installed. Others in this category: Fancy Dress, Talents Show, Special Performances, Exhibition, Cultural Programs, Theme Events eTalenter matches an item to its criteria on the words in its name, and creates exactly these when the template is installed. Each organiser scores this competition on its own criteria. These are the ones the ready-made templates carry.How it is scored
Where it sits
Judging criteria installed for it
How organisers judge it
DepEd Festival of Talents (Division, Regional and National)
What judges look at in Electrical Installation and Maintenance (EIM)
What a Electrical Installation and Maintenance (EIM) panel is actually weighing up, and where the marks are usually won or lost:
- Accuracy of interpretation of the schematic diagram (25): every symbol read correctly, with the right component in the right place and each connection matching the drawing.
- Accuracy of installation (30): firm terminations, tidy and correctly routed wiring, components mounted square, and a circuit that works when tested.
- Use of tools (15): choosing the right tool for each task, such as strippers, screwdrivers and cutters, and handling it correctly.
- Safety (15): isolating the supply, no bare conductor left exposed, and orderly working habits; unsafe handling can cost marks even when the circuit works.
- Speed (10): finishing within the round, though speed that produces a faulty connection loses more marks than it gains.
- Ability to explain the process (5): describing in plain words what each part of the circuit does and why the steps were done in that order.
Treat these as the judging focus, not a fixed rubric: publish your own weighted criteria for Electrical Installation and Maintenance (EIM) under Scoring Setup, or start from the judge scoring and tabulation software guide.
How to prepare for Electrical Installation and Maintenance (EIM)
How entrants and their teachers usually get Electrical Installation and Maintenance (EIM) right on the day:
- Learn the standard electrical symbols until you can read a schematic without looking anything up, since 25 marks depend on interpretation alone.
- Practise building one circuit at a time on a board, testing it before moving to a harder one.
- Build a repeatable order of work: read the diagram, mark the layout, mount components, run the wiring, then check each connection against the drawing.
- Practise correct stripping length and tight terminations; loose or exposed copper is the most common visible fault.
- Rehearse safe habits as part of every practice, including switching off and confirming the supply is dead, so they are automatic on the day.
- Time yourself on a full circuit, and note which step runs longest.
- Prepare a short spoken explanation of how current flows through your circuit and what each component does.
- Confirm with the organiser which tools and materials are provided and whether you may bring your own.
Events that run this (1)
Ready-made templates that already include this competition. Installing one sets it up for you.
Frequently asked questions
Is Electrical Installation and Maintenance (EIM) judged individually or as a team?
Across eTalenter’s templates it’s most often run as an Individual entry, though an organiser can set either participation type when assigning the item to an age group.
What is EIM in this festival?
It is a Grade 9-12 individual contest in this festival template. The learner reads a schematic diagram, installs the circuit it describes and is marked out of 100.
What earns the most marks?
Accuracy of installation is worth 30 marks and interpretation of the schematic diagram 25. Tool use and safety are 15 each, speed is 10 and explaining the process is 5.
Does a working circuit guarantee full marks?
No. Safety and tool use are marked separately, so a circuit that works but was built unsafely or with poor tool handling still loses marks.
Which tools and circuit will be used?
The template does not print a tool list, circuit or time limit. Organisers normally announce them in the brief; confirm them before the day.
Is it judged individually or as a team?
Individually. Each learner builds one installation and receives one mark out of 100.
Similar competitions
Items whose names share a word with this one — usually the same discipline in another form.
Want the full judging picture? Read the judge scoring and tabulation software guide, or browse every special competition item.
Try Electrical Installation and Maintenance (EIM) in eTalenter
See every ready-made template that runs Electrical Installation and Maintenance (EIM), and install one as a live event — age groups, rules and scoring included.
See where Electrical Installation and Maintenance (EIM) is used
